基于改进社会工程算法的拆解线平衡多目标优化设计

田广东; 张志峰; 张诚; 张乐乐

引用本文:

【打印本页】【下载PDF全文】【查看/发表评论】【EndNote】【RefMan】【BibTex】

←前一篇|后一篇→

过刊浏览高级检索

本文已被：浏览 1119次下载 725次	码上扫一扫！
分享到：微信更多字体:加大+\|默认\|缩小-
基于改进社会工程算法的拆解线平衡多目标优化设计
田广东^1,2,3,张志峰²,张诚³,张乐乐⁴
1.山东交通学院运输车辆检测、诊断与维修技术交通行业重点实验室，济南 250357;2.浙江大学流体动力与机电系统国家重点实验室，杭州 310027;3.山东大学机械工程学院，济南 250061;4.交通运输部管理干部学院综合运输教研部, 北京 101601

摘要:

目的为了提高拆卸效率，减少拆卸成本和拆卸能耗，提出一种基于社会工程算法的优化方法。方法首先根据社会工程算法的原理设计了编码和解码方式，然后引入交换子和交换序列的概念，对算法中的训练和再训练、发现攻击和响应攻击等步骤进行设计，最后选取一个高速电子套结机作为实验对象进行了验证。结果与其他多目标优化算法相比，具有良好的寻优能力。结论提出的算法有效地解决了拆解线平衡问题，与其他算法相比具有更好的性能。

关键词: 拆解线平衡社会工程算法绿色设计绿色制造

DOI：10.19554/j.cnki.1001-3563.2022.12.006

分类号:TB472

基金项目:浙江大学流体动力与机电系统国家重点实验室开放基金(GZKF-202012)，山东交通学院运输车辆检测、诊断与维修技术交通行业重点实验室开放基金(JTZL2101)，国家自然科学基金(52075303)

Multi-objective Optimization of Disassembly Line Balancing Based on Improved Social Engineering Optimizer

TIAN Guang-dong^1,2,3, ZHANG Zhi-feng², ZHANG Cheng³, ZHANG Le-le⁴

(1.Transport Industry Key Laboratory of Vehicle Detection, Diagnosis and Maintenance Technology, ShanDong JiaoTong University, Jinan 250357, China;2.State Key Laboratory of Fluid Power & Mechatronic Systems, Zhejiang University, Hangzhou 310027, China;3.School of Mechanical Engineering, Shandong University, Jinan 250061, China;4.Transport Management Institute Ministry of Transport of the P. R. China, Ministry of Comprehensive Transport Education and Research, Beijing 101601, China)

Abstract:

This paper aims to improve disassembly efficiency and reduce disassembly cost and disassembly energy consumption, and an optimization method based on a social engineering optimizer is proposed. Firstly, in this paper, the encoding and decoding method is designed according to the principle of social engineering optimizer. And then the concepts of swap sub and swap sequence are introduced. Next, the steps of training and retraining, discovering attack and responding to attack in the algorithm are designed. Finally, a high-speed electronic tacking machine is selected as the experimental objective for validation. This method has good optimization capacity compared with other multi-objective algorithms. The proposed algorithm effectively addresses the disassembly line balancing problem and has better performance compared with other algorithms.

Key words: disassembly line balancing social engineering optimizer green design green manufacturing