复合材料发射箱体缠绕成型工艺研究

李小东; 黄军

引用本文:

【打印本页】【下载PDF全文】【查看/发表评论】【EndNote】【RefMan】【BibTex】

←前一篇|后一篇→

过刊浏览高级检索

本文已被：浏览 2709次下载 1976次	码上扫一扫！
分享到：微信更多字体:加大+\|默认\|缩小-
复合材料发射箱体缠绕成型工艺研究
李小东¹, 黄军²
1.东莞职业技术学院，东莞 523808;2.湖南工业大学，株洲 412007

摘要:

目的针对矩形截面复合材料箱体，对缠绕成型工艺进行研究。方法优选材料体系并进行结构优化设计，利用组合式成型模具，通过螺旋缠绕方式，突破矩形截面箱体缠绕张力控制与功能层快速铺放等关键技术。结果箱体通过了各项性能试验及环境试验考核。结论该工艺适用于树脂基复合材料发射箱箱体缠绕成型，其他等截面树脂基复合材料构件缠绕成型可参照使用。

关键词: 箱体缠绕拔模斜度

DOI：10.19554/j.cnki.1001-3563.2018.07.024

分类号:TB484

基金项目:

Winding Molding Process of Composite Launch Box

LI Xiao-dong¹, HUANG Jun²

1.Dongguan Polytechnic, Guangdong 523808, China;2.Hunan University of Technology, Zhuzhou 412007, China

Abstract:

The work aims to study the process of winding modeling with respect to the composite box of a rectangular section. The material system was optimized and the structural optimization design was conducted. The key technologies (such as winding tension control of the box of a rectangular section and rapid placement of the functional layer, etc.) were broken through by means of combined forming mold and spiral winding. The box passed various performance tests and environmental test examinations. The process is suitable for the winding molding of the launch box of resin based composite, and it can be used as a reference for the winding modeling of other uniform- section composite components.

Key words: box winding pattern draft