引用本文:
【打印本页】   【下载PDF全文】   查看/发表评论  【EndNote】   【RefMan】   【BibTex】
←前一篇|后一篇→ 过刊浏览    高级检索
本文已被:浏览 3324次   下载 1906 本文二维码信息
码上扫一扫!
分享到: 微信 更多
蓄冷剂摆放位置对保温箱中温度场的影响
潘欣艺1,2, 王家俊3, 王冬梅4
1.浙江理工大学,杭州 310000;2.深圳职业技术学院,深圳 518000;3.浙江理工大学,杭州 310000;4.深圳职业技术学院,深圳 518000
摘要:
目的 探讨蓄冷剂摆放位置不同时,保温箱保温过程中内部温度场的分布情况和变化规律。方法 应用有限元法,以ICEMCFD建立保温箱基本模型,并通过改变模型内部蓄冷剂的摆放位置建立侧面摆放(2种)、顶部摆放和边缘摆放共4种摆放方式。将内部空气的对流换热与箱体的热传导过程统一成一个整体,通过Fluent进行热流耦合分析。结果 得到了保温箱内部温度场分布一般规律,蓄冷剂摆放位置不同时温度场分布情况有很大差异,其中边缘摆差异性最大,侧摆次之,顶摆温度场分布最均匀。结论 针对可利用体积、温度场均匀程度、箱内平均温度来说,顶摆方式无疑是最佳的蓄冷剂摆放位置。
关键词:  蓄冷剂  摆放位置  保温箱  Fluent  温度场
DOI:10.19554/j.cnki.1001-3563.2018.03.015
分类号:TB487
基金项目:
Influences of Ctesms Placement on the Temperature Field of Incubator
PAN Xin-yi1,2, WANG Jia-jun3, WANG Dong-mei4
1.Zhejiang Sci-tech University, Hangzhou 310000, China;2.Shenzhen Polytechnic, Shenzhen 518000, China;3.Zhejiang Sci-tech University, Hangzhou 310000, China;4.Shenzhen Polytechnic, Shenzhen 518000, China
Abstract:
The work aims to study the distribution and change law of the temperature field inside the incubator during its thermal insulation when the ctesms is placed at different positions. The fundamental model of incubator was established in the finite element method by ICEMCFD, and four kinds of layouts were built by changing the placement of the ctesms inside the model, including the side placement (two kinds), top placement and edge placement. The convective heat transfer of internal air and heat conduction of box were unified as a whole to carry out the thermal-fluid coupling analysis by Fluent. The general rule of temperature field distribution inside the incubator was obtained. With the different positions of the ctesms, temperature field distribution was very different when the edge placement was of the biggest difference, followed by the side placement. The temperature field of top placement was distributed the most uniformly. In terms of available volume, temperature field uniformity and average temperature inside the incubator, it is no doubt that the top placement is the best choice for the ctesms.
Key words:  ctesms  placement  incubator  Fluent  temperature field

关于我们 | 联系我们 | 投诉建议 | 隐私保护 | 用户协议

您是第26481909位访问者    渝ICP备15012534号-2

版权所有:《包装工程》编辑部 2014 All Rights Reserved

邮编:400039 电话:023-68795652 Email: designartj@126.com

    

渝公网安备 50010702501716号