| 本文已被：浏览 3170次 下载 2855次 |
码上扫一扫！ |
|
|
| 钢提桶塑料提梁自动安装工艺及方案设计 |
|
沈俊杰1, 潘嘹2, 华岩3,4, 蒋焕新3,4, 周洪军3,4, 卢立新3,4
|
|
1.苏州华源包装股份有限公司，苏州 215235;2.江南大学，无锡 214122;3.1. 江南大学，无锡 214122;4.2. 江苏省食品先进制造装备技术重点实验室，无锡 214122
|
|
| 摘要: |
| 目的 设计一种适用于钢提桶的塑料提梁自动安装工艺及方案。方法 参考现有钢桶供送、 夹持、 定位的生产工艺， 模拟人工钢提桶塑料提梁安装的动作过程。结果 提出了钢桶塑料提梁自动装配的工艺流程， 设计了钢桶塑料提梁自动装配的路线， 并对钢桶塑料提梁自动装配机的各部分组件进行方案设计。其中包括罐身供送方案设计、 焊耳定位方案设计、 塑料提梁供送方案设计、 塑料提梁弯曲装置方案设计和塑料提梁安装装置方案设计。结论 所设计的钢桶塑料提梁安装方案预计可实现每分钟60罐的装配速度， 大大提高了生产效率。 |
| 关键词: 钢提桶 塑料提梁 自动安装 工艺 |
| DOI： |
| 分类号:TB486+.02 |
| 基金项目: |
|
| Automatic Assembling Process of Plastic Handle for Steel Drum and Related Scheme Design |
|
SHEN Jun-jie1, PAN Liao2, HUA Yan3,4, JIANG Huan-xin3,4, ZHOU Hong-jun3,4, LU Li-xin3,4
|
|
1.Suzhou Huayuan Packaging Co.， Ltd.， Suzhou 215235， China;2.Jiangnan University， Wuxi 214122， China;3.1. Jiangnan University， Wuxi 214122， China;4.2. Jiangsu Key Laboratory of Advanced Food Manufacturing Equipment and Technology， Wuxi 214122， China
|
| Abstract: |
| The aim of this paper was to design an automatic assembling process of plastic handle for steel drum. The manual assembling process of plastic handle steel drum was simulated and the current production process of steel drum including feeding, clamping and positioning was used as reference. An automatic assembling process of plastic handle was proposed, and the process route for automatic assembling of plastic handle for steel drum was designed. Furthermore, the assembling scheme of key units of the automatic assembler of plastic handle for steel drum was also designed, including steel drum feeding, weld joint location, plastic handle feeding, plastic handle flexing and plastic handle assembling. The expectant assembling speed of the proposed process reached up to 60 drum/min, which significantly improved the production efficiency. |
| Key words: steel drum plastic handle automatic assembling process |
渝公网安备 50010702501716号