引用本文:
【打印本页】   【下载PDF全文】   查看/发表评论  【EndNote】   【RefMan】   【BibTex】
←前一篇|后一篇→ 过刊浏览    高级检索
本文已被:浏览 2786次   下载 2440 本文二维码信息
码上扫一扫!
分享到: 微信 更多
基于PEDA的UV固化水性聚氨酯乳液及涂膜性能研究
王正祥1, 李运华1, 肖细梅1, 陈洪2
1.湖南工业大学,株洲 412007;2.中南林业科技大学,长沙 410004
摘要:
目的 研究双键含量可调的紫外光固化水性聚氨酯乳液及其涂膜性能。方法 通过直接酯化法制备季戊四醇二丙烯酸酯(PEDA), 并以其为功能性扩链剂与甲苯二异氰酸酯(TDI)、 聚酯二元醇(POL-756T)、 二羟甲基丙酸 (DMPA) 等原料制备一系列从侧基引入C=C双键的水性聚氨酯乳液。分别研究不同含量的PEDA及DMPA对乳液及涂膜性能的影响。结果 PEDA含量的增加会使其涂膜拉伸强度增加, 断裂伸长率降低, 热稳定性随之增强; DMPA含量的增加会使乳液的稳定性增强, 颜色更加透明, 粒径变小, 但耐水性会降低。结论 当PEDA质量分数为6.1%, DMPA为8.3%时, UV固化水性聚氨酯乳液具有良好的外观、 稳定的性能, 且涂膜的耐水性和力学性能优异。
关键词:  紫外光固化  水性聚氨酯  性能
DOI:
分类号:TS206.4
基金项目:
Properties of UV-Curable Waterborne Polyurethane Emulsion and Its Film Based on PEDA
WANG Zheng-xiang1, LI Yun-hua1, XIAO Xi-mei1, CHEN Hong2
1.Hunan University of Technology, Zhuzhou 412007, China;2.Central South University of Forestry and Technology, Changsha 410004, China
Abstract:
This work aimed to study the UV-curable waterborne polyurethane emulsion with adjustable double bond content and its film properties. The pentaerythritol diacrylate (PEDA) was prepared via direct esterification, and used as a functional chain extender to synthesize a series of UV-curing waterborne polyurethane emulsion by introducing the C=C bond into the side chain, with 2,4-tolylene diisocyanate (TDI), polyethylene glycol (POL-756T), dimethylol propinic acid (DMPA) as main materials. The effects of different PEDA and DMPA contents on the emulsion and film properties were studied. The increase of PEDA content could lead to the increase of film tensile strength and thermal stability while the decrease of elongation at break. The increase of DMPA content could lead to improved storage stability, increased transparence, finer particle size and decreased water resistance. When the PEDA content was 6.1% and the DMPA content was 8.3%, the WPU emulsion had good appearance and stability, and the coating film had excellent water resistance and mechanical property.
Key words:  UV-curable  waterborne polyurethane  performance

关于我们 | 联系我们 | 投诉建议 | 隐私保护 | 用户协议

您是第26481884位访问者    渝ICP备15012534号-2

版权所有:《包装工程》编辑部 2014 All Rights Reserved

邮编:400039 电话:023-68795652 Email: designartj@126.com

    

渝公网安备 50010702501716号