引用本文:
【打印本页】   【下载PDF全文】   查看/发表评论  【EndNote】   【RefMan】   【BibTex】
←前一篇|后一篇→ 过刊浏览    高级检索
本文已被:浏览 2295次   下载 1583 本文二维码信息
码上扫一扫!
分享到: 微信 更多
特定结构木塑托盘静态弯曲性能的研究
张肖庆, 陆佳平, 王艳菊, 王雪芬
江南大学, 无锡 214122
摘要:
以一款特定结构的木塑托盘为研究对象,基于托盘结构和连接方式两方面考虑,以托盘实验过程中的实际承载条件为依据,分析了其可能存在的失效模式,通过实验研究确定了其评价指标。 在 Ansys Workbench 环境下建立结构模型,对 2 种失效模式进行了模拟,分析了整体结构及螺栓连接在静态弯曲下的承载特性。 通过进一步分析比较,验证了材料结构的性能要求和设计的合理性。
关键词:  木塑托盘  静态弯曲  实验研究  模拟分析
DOI:
分类号:TB484. 2; TB487
基金项目:
Static Bending Performance of Specific Structure WPC Pallet
ZHANG Xiao-qing, LU Jia-ping, WANG Yan-ju, WANG Xue-fen
Jiangnan University, Wuxi 214122, China
Abstract:
Specific WPC pallet was taken as an object of study. The possible failure modes of the pallet were analyzed considering the pallet structure and combination pattern. The evaluation indexes were determined through experimental study based on the actual bearing capacity. The structure models were established in Ansys Workbench environment and two failure modes were simulated. The bearing characteristic of over-all structure and bolted connection under static bending was analyzed. The performance of material and rationality of design was verified through further analysis.
Key words:  WPC pallet  static bending  experimental research  simulation analysis

关于我们 | 联系我们 | 投诉建议 | 隐私保护 | 用户协议

您是第27040307位访问者    渝ICP备15012534号-2

版权所有:《包装工程》编辑部 2014 All Rights Reserved

邮编:400039 电话:023-68795652 Email: designartj@126.com

渝公网安备 50010702501716号