基于ANSYS Workbench 的瓦楞纸箱抗压性能仿真研究

段艳健; 钱 怡

引用本文:

【打印本页】【下载PDF全文】【查看/发表评论】【EndNote】【RefMan】【BibTex】

←前一篇|后一篇→

过刊浏览高级检索

本文已被：浏览 3182次下载 2868次	码上扫一扫！
分享到：微信更多字体:加大+\|默认\|缩小-
基于ANSYS Workbench 的瓦楞纸箱抗压性能仿真研究
段艳健, 钱怡
江南大学，无锡 214122

摘要:

建立了瓦楞纸箱的有限元模型并进行了结构修正，应用ANSYS Workbench有限元分析软件对纸箱结构模型进行了屈曲分析，从而求得了瓦楞纸箱的抗压强度，最后通过抗压试验进行了验证。有限元分析结果与试验结果比较接近，验证了模型的有效性。

关键词: 有限元模型屈曲抗压强度 Ansys Workbench

DOI：

分类号:TB487; TP391.9

基金项目:

Simulation Study of Compression Strength of Corrugated Box Based on ANSYS Workbench

DUAN Yan-jian, QIAN Yi

Jiangnan University, Wuxi 214122, China

Abstract:

Finite element models of corrugated box were established and modification of corrugated box structure was carried out. Buckling analysis was carried out on corrugated box structure models using ANSYS Workbench and the compression strength of corrugated boxes was obtained. Compression experiments were carried out to verify the simulation. The result showed that finite element analysis result is close to the experiment result; the models are valid.

Key words: finite element model buckling compression strength ANSYS Workbench