引用本文:
【打印本页】   【下载PDF全文】   查看/发表评论  【EndNote】   【RefMan】   【BibTex】
←前一篇|后一篇→ 过刊浏览    高级检索
本文已被:浏览 2366次   下载 1852 本文二维码信息
码上扫一扫!
分享到: 微信 更多
基于电子标签导电油墨厚度的研究
吴光远, 钱军浩, 唐 铖
江南大学, 无锡 214122
摘要:
在电子标签的印制中,采用分层印刷电子标签天线的思路,提出了分层蝶形天线模型,并进行了仿真模拟,研究了墨层厚度对蝶形天线辐射效率的影响。由仿真结果分析可知:不同区域电流密度的高低影响分层天线的辐射效率,在天线上找到了分层最佳点,分层天线的辐射效率比单层天线高。解决了印刷天线墨层厚度与辐射效率矛盾的问题。
关键词:  电子标签  导电油墨  油墨厚度  分层印刷  组合印刷  辐射效率
DOI:
分类号:TS802.3; TS851+.2
基金项目:
Research on Electrically Conductive Ink Thickness Based on RFID
WU Guang-yuan, QIAN Jun-hao, TANG Cheng
Jiangnan University, Wuxi 214122, China
Abstract:
A layered-printed RFID antenna idea and layered butterfly antenna model were put forward for RFID printing. Simulations were carried out and the influence of ink thickness on radiation efficiency of butterfly antenna was studied. Simulation results showed that the current density in different area has influence on radiation efficiency; there is a best point on the antenna which can improve the radiation efficiency of layered antenna higher than single-layer printed antenna. The problems of contradiction between ink thickness and radiation efficiency can be solved through optimization.
Key words:  RFID  electrically conductive ink  ink thickness  layered-printed  combined printing  radiation efficiency

关于我们 | 联系我们 | 投诉建议 | 隐私保护 | 用户协议

您是第27004876位访问者    渝ICP备15012534号-2

版权所有:《包装工程》编辑部 2014 All Rights Reserved

邮编:400039 电话:023-68795652 Email: designartj@126.com

渝公网安备 50010702501716号