引用本文:
【打印本页】   【下载PDF全文】   查看/发表评论  【EndNote】   【RefMan】   【BibTex】
←前一篇|后一篇→ 过刊浏览    高级检索
本文已被:浏览 2427次   下载 2074 本文二维码信息
码上扫一扫!
分享到: 微信 更多
电磁环境下桥丝式电火工品安全性仿真研究
常新龙1, 王建龙1, 张 磊2
1.中国人民解放军第二炮兵工程学院, 西安 710025;2.96411部队, 宝鸡 721013
摘要:
采用等效天线负载法计算了电磁环境下桥丝式电火工品中的辐射感应电流,结合具体算例模拟了核爆电磁脉冲和微波武器作用下桥丝中感应电流的热效应。研究结果表明,核爆电磁脉冲不易造成桥丝火工品的意外发火,但高功率微波武器的连续作用,会导致桥丝式电火工品在极短的时间内发火。
关键词:  桥丝式电火工品  安全性  电磁环境  感应电流
DOI:
分类号:TB487; TJ765.4
基金项目:
Simulation Study on Security of Bridge Wire Electric Explosive Device in Electromagnetic Environment
CHANG Xin-long1, WANG Jian-long1, ZHANG Lei2
1.Second Artillery Engineering Institute, Xi′an 710025, China;2.Unit 96411 of PLA, Baoji 721013, China
Abstract:
The method of equivalent aerial and load was used to calculate the induced current in the bridge of bridge wire electric explosive device (EED) that caused by electromagnetic radiation. An example was used to simulate the heat effect of induced current at the interfaces between wire and powder of EED. Simulation result showed that the electromagnetic pulse of nuclear explosion usually does not cause explosion of EED, but the continuous action of high power microwave weapons can cause explosion of EED.
Key words:  bridge wire EED  security  electromagnetic environment  induced current

关于我们 | 联系我们 | 投诉建议 | 隐私保护 | 用户协议

您是第26481218位访问者    渝ICP备15012534号-2

版权所有:《包装工程》编辑部 2014 All Rights Reserved

邮编:400039 电话:023-68795652 Email: designartj@126.com

    

渝公网安备 50010702501716号