轻型环保陶瓷网纹辊的研究与实践

潘光华

引用本文:

【打印本页】【下载PDF全文】【查看/发表评论】【EndNote】【RefMan】【BibTex】

←前一篇|后一篇→

过刊浏览高级检索

本文已被：浏览 2553次下载 1891次	码上扫一扫！
分享到：微信更多字体:加大+\|默认\|缩小-
轻型环保陶瓷网纹辊的研究与实践
潘光华
深圳职业技术学院，深圳 518055

摘要:

以较轻的铝合金为网纹辊材料，分析了网纹辊网穴参数及网穴雕刻与表面陶瓷处理技术，经过反复变换网纹辊网穴雕刻及陶瓷处理方法，总结出了铝合金表面可行的网穴雕刻及陶瓷处理工艺，研究出了轻型环保陶瓷网纹辊的制作工艺流程。

关键词: 网纹辊网穴陶瓷处理

DOI：

分类号:TS802.5

基金项目:

Research and Development of Light Environmental Friendly Ceramic Anilox Roller

PAN Guang-hua

Shenzhen Polytechnic, Shenzhen 518055, China

Abstract:

Light aluminum alloy was used to make anilox roller. The ink cell parameters, ink cell engraving and ceramic processing technology on the surface of anilox roller were analyzed. A reasonably practicable ink cell engraving and ceramic processing technology on the surface of aluminum alloy was developed after repeated experiments. Process flow for manufacturing of light environmental friendly ceramic anilox roller was developed.

Key words: anilox roller ink cell ceramic processing