引用本文:
【打印本页】   【下载PDF全文】   查看/发表评论  【EndNote】   【RefMan】   【BibTex】
←前一篇|后一篇→ 过刊浏览    高级检索
本文已被:浏览 2518次   下载 1771 本文二维码信息
码上扫一扫!
分享到: 微信 更多
不同密度木塑结构板材的可靠性分析
于贵文
哈尔滨商业大学, 哈尔滨 150028
摘要:
聚乙烯基木塑结构板材作为弹药箱包装材料,为了其使用安全性,研究了其可靠性。通过试验获得了其动态弹性模量和静态弹性模量,并运用一次二阶矩方法分析了该种木塑结构板材的可靠性。结果表明:密度大的木塑结构板材可靠性较高,而密度小的木塑结构板材可靠性较低。为木塑结构板材的广泛应用提供了合理依据。
关键词:  木塑复合材料  结构板材  载荷  可靠性分析
DOI:
分类号:TB484.2; TB482.2
基金项目:黑龙江省自然科学基金资助项目(C201014)
Reliability Analysis of Wood-plastic Structural Planks with Different Density
YU Gui-wen
Harbin University of Commerce, Harbin 150028, China
Abstract:
Wood-plastic structural planks made of polyethylene (PE) and poplar flour were used as a packaging material of ammunition. Reliability analysis of the planks is of great significance for safety in service. The modulus of elasticity and static bending strength of the planks were obtained by experiments. The first and second order moment method (FOSM) was used to analyze the reliability of the structural planks. The result showed that the wood-plastic structural planks with higher density have a better reliability than that with lower density. The purpose of this research was to provide reference for wide application of wood-plastic structural planks.
Key words:  wood-plastic composite  structural plank  load  reliability analysis

关于我们 | 联系我们 | 投诉建议 | 隐私保护 | 用户协议

您是第26481858位访问者    渝ICP备15012534号-2

版权所有:《包装工程》编辑部 2014 All Rights Reserved

邮编:400039 电话:023-68795652 Email: designartj@126.com

    

渝公网安备 50010702501716号