| 本文已被：浏览 2052次 下载 1088次 |
码上扫一扫！ |
|
|
| 基于Burgers模型对缓冲材料EPE压缩蠕变行为的分析 |
|
刘艳华1,2,黄利强1,2,付志强1,2,何争辉1,2,张武杰1,2,刘昊喆1,2
|
|
1.天津科技大学 轻工科学与工程学院，天津 300222; 2.天津科技大学 包装创新设计实验室，天津 300222
|
|
| 摘要: |
| 目的 为解决缓冲材料发泡聚乙烯因蠕变引起保护失效的问题，基于Burgers模型，分析载荷、应力保持时间对EPE压缩蠕变行为的影响。方法 根据不同应力下的不同保持时长压缩蠕变试验结果，拟合EPE不同应力下的压缩蠕变试验数据，分析不同应力、应力保持时间下的EPE蠕变过程中蠕变总量、弹性应变、黏弹性应变和黏性应变的变化规律。结果 Burgers四元件力学模型对EPE不同应力下的压缩蠕变实验数据拟合度为0.992 4～0.998 9。在同一应力保持时间下，随着应力从3.3 kPa增加到5.3 kPa，弹性模量E1、弹性模量E2、黏度系数η2、黏度系数η1都逐渐减小，蠕变总量、黏性应变呈非线性显著增加，弹性应变、粘弹性应变呈线性微量增加;在同一应力下，随着应力保持时间从20 d增加到120 d，弹性应变一直保持不变，占蠕变总量的比例降低，粘弹性应变先微量增加后保持不变，占蠕变总量的比例降低，黏性应变增加，占蠕变总量的比例增加。结论 Burgers模型可较准确地模拟EPE不稳定蠕变阶段和稳定蠕变阶段的压缩蠕变行为;应力的增加导致EPE抵抗变形的能力变弱，引起蠕变量增加;应力保持时间的增加对弹性应变无影响，对稳定蠕变阶段的黏弹性应变无影响，对黏性应变的增加有显著影响。 |
| 关键词: 发泡聚乙烯 缓冲材料 Burgers模型 蠕变 压缩 |
| DOI：10.19554/j.cnki.1001-3563.2022.07.018 |
| 分类号:TB484.3 |
| 基金项目:天津市教委科研计划(自然科学)(2019KJ209) |
|
| Compressive Creep Behavior of EPE Cushioning Material Based on Burgers Model |
|
LIU Yan-hua1,2, HUANG Li-qiang1,2, FU Zhi-qiang1,2, HE Zheng-hui1,2, ZHANG Wu-jie1,2, LIU Hao-zhe1,2
|
|
(1.School of Light Industry Science and Engineering Technology, Tianjin 300222, China; 2. Laboratory for Innovative Design of Package, Tianjin University of Science & Technology, Tianjin 300222, China)
|
| Abstract: |
| In order to solve the problem of protection failure caused by creep of cushioning material foamed polyethylene, the effects of load and stress holding time on the compressive creep behavior of EPE cushioning material were analyzed based on Burgers model. Based on the results of the compression creep test results of different holding time under different stresses, the compression creep test data of EPE under different stresses were fitted to analyze the changes of creep total, elastic strain, viscoelastic strain and viscous strain during the creep process of EPE under different stresses and stress holding time. The experimental data fit of Burgers four-element mechanical model for compression creep of EPE under different stresses ranged from 0.992 4 to 0.998 9. At the same stress holding time, as the stress increased from 3.3 kPa to 5.3 kPa, the elastic modulus E1, elastic modulus E2, viscosity coefficient η2 and viscosity coefficient η1 all decrease. The total creep and viscous strain increase nonlinearly, while the elastic strain and viscoelastic strain increase linearly. At the same stress, as the stress retention time increases from 20 days to 120 days, the elastic strain remains constant and its proportion to the total creep decreases. The viscoelastic strain increases slightly at first and then remains constant, and its proportion to the total creep decreases while the viscous strain increases and its proportion to the total creep increases. Burgers model can accurately simulate the compressive creep behavior of EPE in unstable creep stage and stable creep stage. The increase of stress leads to the weakening of EPE's ability to resist deformation and the increase of creep. The increase of stress holding time has no effect on the elastic strain, and has no effect on the viscoelastic strain in the stable creep stage, but has a significant effect on the increase of viscous strain. |
| Key words: foamed polyethylene cushioning material Burgers model creep compressive |
