| 引用本文: | 文杰,马春生,刘建国,李瑞琴,屈淑维.基于2-RCU/CUR并联机构的运动学分析[J].包装工程,2022,43(3):228-233. |
| |
|
| |
|
|
| 本文已被：浏览 1681次 下载 1044次 |
码上扫一扫！ |
|
|
| 基于2-RCU/CUR并联机构的运动学分析 |
|
文杰,马春生,刘建国,李瑞琴,屈淑维
|
|
中北大学 机械工程学院，太原 030051
|
|
| 摘要: |
| 目的 随着产品的种类的丰富，出现了各类产品喷码方式不同的问题。为使得喷码机适用于不同产品，文中提出一种转动幅度较大的2-RCU/CUR机构，用于多种类产品喷码。方法 应用螺旋理论对2-RCU/CUR机构进行自由度分析，并用改进的G-K公式进行验证，用闭环矢量法对机构的位置分析进行反解，在SolidWorks软件中绘制出机构模型，最后用Matlab软件对机构工作空间编程求解并绘制出工作空间。结果 2-RCU/CUR并联机构具有3个自由度，分别为2个转动自由度和1个移动自由度，在机构的工作空间内，动平台绕y轴的转动可达90°，且在工作空间内没有奇异位型。结论 2-RCU/CUR并联机构结构简单且稳定，工作精度高，工作空间较大，可以适用于多种产品喷码流程，可以提高经济效益。 |
| 关键词: 2-RCU/CUR 自由度 位置反解 工作空间 |
| DOI：10.19554/j.cnki.1001-3563.2022.03.028 |
| 分类号:TB486;TH112 |
| 基金项目:山西省自然科学基金(201801D121183);山西省回国留学人员科研资助项目(2021-114) |
|
| Kinematics Analysis Based on 2-RCU/CUR Parallel Mechanism |
|
WEN Jie, MA Chun-sheng, LIU Jian-guo, LI Rui-qin, QU Shu-wei
|
|
(School of Mechanical Engineering, North University of China, Taiyuan 030051, China)
|
| Abstract: |
| With the variety of products being enriched, the labeling methods for various products are also different. The work aims to propose a 2-RCU/CUR mechanism with large rotation that can be used to label different products, so as to make the marking machines suitable for various products. The degree of freedom of 2-RCU/CUR mechanism was analyzed by screw theory and verified by the improved G-K formula. The closed-loop vector method was used to carry out inverse kinematics on the position of the mechanism, and the mechanism model was drawn in SolidWorks software. Finally, the workspace of the mechanism was programmed and solved by Matlab software and the workspace was drawn by this software. The 2-RCU/CUR parallel mechanism had three degrees of freedom, two for rotation and one for movement. In the workspace of the mechanism, the rotation of the moving platform reached 90° around the y axis, and there was no singularity mode in the workspace. The 2-RCU/CUR parallel mechanism has a simple and stable structure, with high working accuracy and large workspace and can be applied to a variety of product labeling processes to improve the economic benefits. |
| Key words: 2-RCU/CUR degree of freedom inverse kinematics workspace |
|
