引用本文:童婷,袁新强,李培友,李雷权,包维维,李亚鹏,丁镠.半酯改性环氧E-44的合成及其性能研究[J].包装工程,2020,41(19):116-121.
【打印本页】   【下载PDF全文】   查看/发表评论  【EndNote】   【RefMan】   【BibTex】
←前一篇|后一篇→ 过刊浏览    高级检索
本文已被:浏览 2067次   下载 1779 本文二维码信息
码上扫一扫!
分享到: 微信 更多
半酯改性环氧E-44的合成及其性能研究
童婷, 袁新强, 李培友, 李雷权, 包维维, 李亚鹏, 丁镠
陕西理工大学 材料科学与工程学院,陕西 汉中 723001
摘要:
目的 研究半酯质量分数对环氧树脂性能的影响,获得较佳参数,制备性能优良的半酯改性环氧树脂。方法 采用半酯法合成半酯改性环氧树脂,通过酸值计算、傅里叶变换红外光谱、接触角和热重分析研究酯化规律及改性树脂的疏水性和热力学性能等。结果 酸值随时间的变化基本符合指数函数。随着半酯含量的增加,接触角虽然整体上呈递减趋势,但在半酯质量分数为50%时,接触角较大;半酯与环氧树脂充分反应,热稳定性较好。结论 成功合成了半酯改性环氧树脂,改性环氧树脂的力学性能和热稳定性得到提高。
关键词:  丙烯酸酯树脂  环氧树脂  半酯法
DOI:10.19554/j.cnki.1001-3563.2020.19.016
分类号:TQ323.5
基金项目:陕西理工大学校级科研基金(SLGKY2017-13);陕西理工大学基金(SLG1810);陕西理工大学重点科研机构开放课题(SLGPT2019KF01-03)
Preparation and Properties of Epoxy E-44 Modified Semi-ester
TONG Ting, YUAN Xin-qiang, LI Pei-you, LI Lei-quan, BAO Wei-wei, LI Ya-peng, DING Liu
School of Materials and Engineering, Shaanxi University of Technology, Hanzhong 723001, China
Abstract:
The influence of semi-ester mass fraction on the properties of epoxy resin was studied, and the better pa-rameters were obtained to prepare the semi-ester modified epoxy resin with excellent performance. Semi-ester modified epoxy resin was synthesized by semi-ester method. The esterification law and the hydrophobicity and thermodynamic properties of the modified resin were studied by acid value calculation, Fourier transform infrared spectroscopy (FT-IR), contact angle (CA) and thermogravimetric analysis (TGA). The change of acid value with time basically conformed to the exponential function. With the increase of the content of semi-ester, the contact angle decreased as a whole, while the contact angle was larger when the mass fraction of semi-ester was 50%, the semi-ester and epoxy resin fully reacted, and the thermal stability was good. The semi-ester modified epoxy resin was successfully synthesized, and the mechanical properties and thermal stability of the modified epoxy resin were improved.
Key words:  acrylic resin  epoxy resin  semi-ester method

关于我们 | 联系我们 | 投诉建议 | 隐私保护

您是第24463766位访问者    渝ICP备15012534号-2

版权所有:《包装工程》编辑部 2014 All Rights Reserved

邮编:400039 电话:023—68792836传真:023—68792396 Email: designartj@126.com

    

  
 

渝公网安备 50010702501717号