引用本文:梁秀,王玉龙,王柳.塑料围板箱抗压强度分析[J].包装工程,2016,37(13):60-64.
【打印本页】   【下载PDF全文】   查看/发表评论  【EndNote】   【RefMan】   【BibTex】
←前一篇|后一篇→ 过刊浏览    高级检索
本文已被:浏览 3264次   下载 2312 本文二维码信息
码上扫一扫!
分享到: 微信 更多
塑料围板箱抗压强度分析
梁秀, 王玉龙, 王柳
武汉大学,武汉 430079
摘要:
目的 研究塑料围板箱抗压强度的影响因素。 方法 通过压力实验,研究不同尺寸塑料围板箱在不同温度下的抗压性能及其变化规律。 结果 得到了塑料围板箱在不同温度下、不同周边长的载荷-变形曲线及其抗压强度。 结论 在一定范围内,温度越高,周边长越大,塑料围板箱抗压强度越低;高温下周边长对其抗压强度影响较小。
关键词:  塑料围板箱  抗压强度  温度  周边长
DOI:
分类号:TB484.3; TB487
基金项目:武汉大学开放实验项目(201505)
Compression Strength of Plastic Foldable Container
LIANG Xiu, WANG Yu-long, WANG Liu
Wuhan University, Wuhan 430079, China
Abstract:
This work aimed to study the factors affecting the compression strength of plastic foldable container. The compression strength and its changing rule of plastic foldable container with different sizes were studied by compression test. The load-deformation curves and the corresponding compression strength of plastic foldable container with different girth at different temperature were obtained. The compression strength of plastic foldable container decreased with the increase of temperature and girth within a certain range. The effect of girth on compression strength was relatively small at high temperature.
Key words:  plastic foldable container  compression strength  temperature  girth

关于我们 | 联系我们 | 投诉建议 | 隐私保护

您是第24463752位访问者    渝ICP备15012534号-2

版权所有:《包装工程》编辑部 2014 All Rights Reserved

邮编:400039 电话:023—68792836传真:023—68792396 Email: designartj@126.com

    

  
 

渝公网安备 50010702501717号