引用本文:邹饶邦彦,张春和,何健.基于RFID技术的包装储运模式优化探析[J].包装工程,2016,37(1):39-42,93.
【打印本页】   【下载PDF全文】   查看/发表评论  【EndNote】   【RefMan】   【BibTex】
←前一篇|后一篇→ 过刊浏览    高级检索
本文已被:浏览 2832次   下载 2803 本文二维码信息
码上扫一扫!
分享到: 微信 更多
基于RFID技术的包装储运模式优化探析
邹饶邦彦, 张春和, 何健
军事交通学院,天津 300161
摘要:
目的 针对目前储运环节中存在的以及可能出现的问题, 探析了RFID技术在配送中心集合包装上的应用。方法 以物流配送中心的运营模式为实例, 结合物联技术的特点, 以流程图的方式分析了RFID技术在包装储运中的应用。结果 通过配送中心的储运流程分析, 得出了在使用RFID系统后改进的运营流程, 并可由此得出基于RFID的优化模式。结论 通过将改进后的系统运营流程与之前的对比, 得出了使用RFID等物联技术的优势所在。
关键词:  包装物流  物联技术  配送中心  RFID技术
DOI:
分类号:TB485.3
基金项目:
Optimization of Warehouse Packaging Mode Based on RFID Technology
ZOU Rao-bang-yan, ZHANG Chun-he, HE Jian
Military Transportation University, Tianjin 300161, China
Abstract:
Focusing on the existing and possible problems in the storage and transportation process, the application of RFID technology in the assembly packaging in distribution center was explored. Taking the operating mode of the distribution center as an example, combined with the characteristics of IOT technology, the application of RFID technology in packaging, storage and transportation was analyzed by means of flow-diagram. Through analysis of the storage and transportation process in distribution center, the improved operating process after application of the RFID technology was obtained, and the optimized working mode based on RFID was derived. Get and get the optimized. By comparison of the operation flow between the improved system and the previous system, the advantages of using IOT technologies such as RFID were revealed.
Key words:  packaging logistics  IOT technologies  distribution center  RFID technology

关于我们 | 联系我们 | 投诉建议 | 隐私保护

您是第24463899位访问者    渝ICP备15012534号-2

版权所有:《包装工程》编辑部 2014 All Rights Reserved

邮编:400039 电话:023—68792836传真:023—68792396 Email: designartj@126.com

    

  
 

渝公网安备 50010702501717号