引用本文:欧阳昊,成伟.蜂窝铝的侵彻实验研究与有限元模拟[J].包装工程,2015,36(23):75-77,93.
【打印本页】   【下载PDF全文】   查看/发表评论  【EndNote】   【RefMan】   【BibTex】
←前一篇|后一篇→ 过刊浏览    高级检索
本文已被:浏览 2585次   下载 2847 本文二维码信息
码上扫一扫!
分享到: 微信 更多
蜂窝铝的侵彻实验研究与有限元模拟
欧阳昊, 成伟
中国工程物理研究院,绵阳 621900
摘要:
目的 研究弹体侵彻蜂窝铝的力学行为。方法 在实验中, 通过轻气炮加速的尼龙弹体冲击蜂窝铝靶体。利用Ansys/LS-DYNA建立了弹体侵彻蜂窝铝的壳单元有限元模型。结果 实验给出了冲击速度为140和167 m/s时弹体的加速度曲线。运用壳单元模型对蜂窝铝的侵彻进行模拟, 得到了弹体的加速度曲线以及蜂窝铝在侵彻过程中的变形图。结论 将模拟结果与实验结果进行了对比, 发现模拟结果与实验结果符合较好, 证明了壳单元有限元模型模拟蜂窝铝侵彻行为的可靠性。
关键词:  蜂窝铝  侵彻  实验研究  有限元
DOI:
分类号:TB484.4;TB487
基金项目:
Experimental Study and Finite Element Simulation on Penetration of Aluminum Honeycomb
OUYANG Hao, CHENG Wei
China Academy of Engineering Physics, Mianyang 621900, China
Abstract:
The aim of this work was to study the mechanical behavior of the projectile penetration into aluminum honeycomb. The aluminum honeycomb target was impacted in the experiment by nylon projectile which was accelerated by light gas gun. The shell finite element model of the projectile penetration into aluminum honeycomb was established by Ansys/LS-DYNA. The acceleration curves of the projectile were given experimentally when the impact velocities were 140 and 167 m/s, respectively. The penetration of aluminum honeycomb was simulated using the shell element model, obtaining the acceleration curves of the projectile and the deformation graphs of aluminum honeycomb during the penetration. The simulation results coincided well with the experimental results, which proved that the shell element model was reliable to simulate the penetration of honeycomb aluminum.
Key words:  aluminum honeycomb  penetration  experimental study  finite element

关于我们 | 联系我们 | 投诉建议 | 隐私保护

您是第24806361位访问者    渝ICP备15012534号-2

版权所有:《包装工程》编辑部 2014 All Rights Reserved

邮编:400039 电话:023—68792836传真:023—68792396 Email: designartj@126.com

 

渝公网安备 50010702501717号