引用本文:齐明思,刘守君,陈晓锦,赵奇,张纪平.冲压式快速类空投试验研究[J].包装工程,2015,36(19):76-78.
【打印本页】   【下载PDF全文】   查看/发表评论  【EndNote】   【RefMan】   【BibTex】
←前一篇|后一篇→ 过刊浏览    高级检索
本文已被:浏览 2638次   下载 2069 本文二维码信息
码上扫一扫!
分享到: 微信 更多
冲压式快速类空投试验研究
齐明思1, 刘守君1, 陈晓锦2, 赵奇1, 张纪平1
1.中北大学,太原 030051;2.空军驻山西地区军事代表室,太原 030024
摘要:
目的 通过类空投试验, 对比研究冲压式快速空投气囊和传统缓冲气囊的着陆过程和着陆缓冲效果。方法 以冲压式快速空投气囊为研究对象, 建立气囊模型, 制作类空投气囊和降落伞模型; 在高约23 m处, 分别进行不使用任何缓冲、 采用传统缓冲气囊、 采用冲压式快速空投气囊的类空投试验。结果采用传统缓冲气囊进行类空投时, 装满水的玻璃瓶和矿泉水瓶损坏概率分别为22.2%和11.1%; 采用冲压式快速空投气囊进行类空投时, 损坏概率均为0。结论 冲压式快速空投气囊的类空投效果远远好于传统缓冲气囊, 为深入研究冲压式快速空投气囊打下了基础。
关键词:  冲压式  空投气囊  类空投试验  缓冲
DOI:
分类号:TB485.1
基金项目:国家自然科学基金-青年基金 (51205373)
Punching Quick Simulated Airdrop Test
QI Ming-si1, LIU Shou-jun1, CHEN Xiao-jin2, ZHAO Qi1, ZHANG Ji-ping1
1.North University of China, Taiyuan 030051, China;2.Military Representative Chamber of the Air Force Stationed in Shanxi Area, Taiyuan 030024, China
Abstract:
The aim of this study was to compare the landing process and the landing cushioning effect of the punching quick airdrop airbag and the traditional cushioning airbag through simulated airdrop tests. This paper took the punching quick airdrop airbag as the research object to establish the airbag model, and prepared the simulated airdrop airbag model and the parachute test model. At a height of 23 meters, three simulated airdrop tests were conducted, without any cushioning, with the traditional airbag and with the punching quick airdrop airbag, respectively. When the traditional airdrop airbag was adopted, the damage probability of the glass bottles filled with water was 22.2%, and that of the mineral water bottles filled with water was 11.1%. When the punching quick airdrop airbag was adopted, the damage probabilities of the glass bottles and the mineral water bottles were both zero. In conclusion, the simulated airdrop tests showed that the cushioning effect of the punching quick airdrop airbag was much better than that of the traditional airbag.
Key words:  punching  airdrop airbag  simulated airdrop test  cushion

关于我们 | 联系我们 | 投诉建议 | 隐私保护

您是第24463691位访问者    渝ICP备15012534号-2

版权所有:《包装工程》编辑部 2014 All Rights Reserved

邮编:400039 电话:023—68792836传真:023—68792396 Email: designartj@126.com

    

  
 

渝公网安备 50010702501717号