引用本文:安胜男,牟信妮,王丽超,王鹏,张书驰,孙诚.n棱柱(台)折叠纸盒自锁底非成型作业线研究[J].包装工程,2015,36(15):67-72.
【打印本页】   【下载PDF全文】   查看/发表评论  【EndNote】   【RefMan】   【BibTex】
←前一篇|后一篇→ 过刊浏览    高级检索
本文已被:浏览 2711次   下载 23 本文二维码信息
码上扫一扫!
分享到: 微信 更多
n棱柱(台)折叠纸盒自锁底非成型作业线研究
安胜男1, 牟信妮2, 王丽超1, 王鹏1, 张书驰1, 孙诚3,4
1.天津科技大学,天津 300222;2.天津职业大学,天津 300410;3.1. 天津科技大学,天津 300222;4.2. 天津职业大学,天津 300410
摘要:
目的 针对市场多样化的需求, 研究扩展对称结构 n棱柱(台)折叠纸盒的自锁底作业线。方法集中研究了各种对称结构多棱柱(台)盒底的第3粘合点, 定义了自锁底纸盒的第1、 第2、 第3非成型作业线, 提出了 n≥5的 n棱柱(台)型自锁底折叠纸盒设计的第3非成型作业线。结果 n不论是奇数还是偶数, 对称结构的 n棱柱(台)折叠纸盒在自锁结构设计时, 第3非成型作业线是盒底主板的轴对称线, 该线是盒底1个角或1对角的角平分线, 其起始端由盒体的成型作业线或第1非成型作业线在盒底投影的位置决定, 这是此结构设计的关键。结论 提出的第3非成型作业线, 可以增加自锁底的粘合面积和盒底强度, 同时使自锁底设计的盒型更加多样化。
关键词:  折叠纸盒  结构设计  自锁底  对称结构  非成型作业线
DOI:
分类号:TB486+.3
基金项目:天津市艺术科学研究规划项目 (E12074)
Non-molding Working Score of Auto End-locked Carton with n Prisms(Frustum)
AN Sheng-nan1, MOU Xin-ni2, WANG Li-chao1, WANG Peng1, ZHANG Shu-chi1, SUN Cheng3,4
1.Tianjin University of Science & Technology, Tianjin 300222, China;2.Tianjin Vocational Institute, Tianjin 300410, China;3.1. Tianjin University of Science & Technology, Tianjin 300222, China;4.2. Tianjin Vocational Institute, Tianjin 300410, China
Abstract:
To fully meet the diversified needs of market, auto end-locked cartons of n prisms (frustum) symmetrical structure folding carton were extended. The design of non-molding working score of auto end-locked structure is critical. Here, our study focused on the third glued point to a variety of multi prisms (frustum) symmetric structure cartons; the first, second, third non molding working score of auto end-locked carton were defined, and the third non-molding working score of auto end-locked carton with n prisms (frustum) was proposed (n≥5). When the auto end-locked carton was designed with n(either odd or even) prisms(frustum) and symmetric structure, the third non molding working score was the axisymmetric line of the main bottom panel, which was the bisector of one or two diagonal angles of the bottom. The starting point was determined by molding working score of carton body or the bottom projection location of the first non molding working score, which was the key to the design of auto end-locked carton with n prisms(frustum) and symmetrical structure. Taken together, the third non molding working score of auto end-locked carton was proposed, which can increase adhesive area, improve bottom strength, and make the type of auto end-locked cartons more diversified.
Key words:  folding carton  structure design  auto end-locked structure  symmetrical structure  non-molding working score

关于我们 | 联系我们 | 投诉建议 | 隐私保护

您是第24463721位访问者    渝ICP备15012534号-2

版权所有:《包装工程》编辑部 2014 All Rights Reserved

邮编:400039 电话:023—68792836传真:023—68792396 Email: designartj@126.com

    

  
 

渝公网安备 50010702501717号