| 引用本文: | 田野,赵雪微,智慧,张莉,杨飞,丁亮,邓宗全.新型转轮式红酒包装结构设计及其跌落有限元分析[J].包装工程,2013,34(19):51-54. |
| |
|
| 本文已被：浏览 2724次 下载 1951次 |
码上扫一扫！ |
|
|
| 新型转轮式红酒包装结构设计及其跌落有限元分析 |
|
田野1,2, 赵雪微3, 智慧3, 张莉3, 杨飞4, 丁亮4, 邓宗全4
|
|
1. 哈尔滨商业大学, 哈尔滨150030;2. 哈尔滨工业大学, 哈尔滨150001;3.哈尔滨商业大学, 哈尔滨150030;4.哈尔滨工业大学, 哈尔滨150001
|
|
| 摘要: |
| 针对目前市场上单一的红酒包装结构,提出了一种新型转轮式包装结构。通过计算得到了转轮式包装结构尺寸,并采用Pro/ E 软件对其进行了三维建模,导入到ANSYS/ LS-DYNA 环境中进行了跌落状态仿真模拟。通过仿真模拟结果与产品脆值的对比分析,对转轮包装结构进行了优化。 |
| 关键词: 红酒包装 转轮式 有限元分析 跌落 |
| DOI： |
| 分类号:TB482. 2 |
| 基金项目:黑龙江省教育厅科技项目(12531165) |
|
| Design of Propeller Type Red Wine Packaging Structure and Drop Finite Element Analysis |
|
TIAN Ye1,2, ZHAO Xue-wei3, ZHI Hui3, ZHANG Li3, YANG Fei4, DING Liang4, DENG Zong-quan4
|
|
1. Harbin University of Commerce, Harbin 150030, China;2. Harbin Institute of Technology, Harbin 150001, China;3.Harbin University of Commerce, Harbin 150030, China;4.Harbin Institute of Technology, Harbin 150001, China
|
| Abstract: |
| A new propeller type packaging structure for red wine was put forward aiming at the single packaging structure on the market. Sizes of the propeller type packaging structure were obtained by calculation. 3D modeling of the packaging structure was established using Pro/ E software. Drop simulation was carried out by introducing to 3D model into ANSYS/ LS-DYNA environment. The packaging structure was optimized through comparing simulation results with the product fragility analysis. |
| Key words: red wine packaging propeller finite element analysis drop test |
