引用本文:罗群生,史光梅,李明海.有限元热分析中空气夹层传热处理方法及其验证[J].包装工程,2011,32(23):117-121,145.
【打印本页】   【下载PDF全文】   查看/发表评论  【EndNote】   【RefMan】   【BibTex】
←前一篇|后一篇→ 过刊浏览    高级检索
本文已被:浏览 3033次   下载 2666 本文二维码信息
码上扫一扫!
分享到: 微信 更多
有限元热分析中空气夹层传热处理方法及其验证
罗群生, 史光梅, 李明海
中国工程物理研究院 总体工程研究所, 绵阳 621900
摘要:
以传热学理论为基础,考虑夹层空气的热传导、对流和辐射,确定夹层空气传热的处理原则。对于较薄空气夹层,在考虑导热和辐射传热的基础上,作等效导热处理;对于较厚和厚空气夹层,则在考虑边界对流、辐射传热的基础上,引入中间节点,处理夹层空气与两壁间的传热。在结构有限元热分析中,用此方法处理空气夹层,温度值计算分析结果与实验实测温度值比较,相符较好。
关键词:  有限元  热分析  空气夹层  中间节点  等效导热  结果比较
DOI:
分类号:TB487; TB482
基金项目:
Air Interlayer Heat Exchange Treatment Method Using Finite Element Analysis and Its Validation
LUO Qun-sheng, SHI Guang-mei, LI Ming-hai
Institute of Systems Engineering, CAEP, Mianyang 621900, China
Abstract:
The treatment principle of air interlayer heat exchange was determined based on heat transfer theory and considering heat conduction, heat convection, and heat radiation. For the thinner air interlayer, equivalent conduction was applied based on heat conduction and heat radiation; for thicker air interlayer, middle nodes was introduced based on allowing a convection surface load and heat radiation. This method can be used to treat heat exchange between air interlayer. The temperature result of simulation was accord with the measured value by experiment.
Key words:  finite element  thermal analysis  air interlayer  middle node  equivalent conduction  result comparison

关于我们 | 联系我们 | 投诉建议 | 隐私保护

您是第24463762位访问者    渝ICP备15012534号-2

版权所有:《包装工程》编辑部 2014 All Rights Reserved

邮编:400039 电话:023—68792836传真:023—68792396 Email: designartj@126.com

    

  
 

渝公网安备 50010702501717号