引用本文:张 慧,张超勇.灰色模型在塑编袋老化试验中的应用[J].包装工程,2011,32(15):79-81.
【打印本页】   【下载PDF全文】   查看/发表评论  【EndNote】   【RefMan】   【BibTex】
←前一篇|后一篇→ 过刊浏览    高级检索
本文已被:浏览 2469次   下载 1701 本文二维码信息
码上扫一扫!
分享到: 微信 更多
灰色模型在塑编袋老化试验中的应用
张 慧, 张超勇
兰州铁路局货运处, 兰州 730000
摘要:
抗老化塑编袋的研发过程中需要进行人工加速老化试验。由于老化试验会导致时间及生产成本的增加,故通过GM(1,1)模型,分别使用5个及9个数据对最终试验结果进行预测,并计算和比较了2种预测结果的相对误差。结果表明,使用9个数据得到的预测结果误差在可接受范围内,可以使用该模型进行预测。利用此模型进行预测,人工加速老化的试验时间可以缩短为96 h,因而可以降低成本,缩短研发时间。
关键词:  塑料编织袋  人工加速老化  灰色理论
DOI:
分类号:TB484.3; TB487
基金项目:
Application of Grey Model in Weathering Tests of Plastic Woven Sack
ZHANG Hui, ZHANG Chao-yong
Dept. of Freight, Lanzhou Railway Bureau, Lanzhou 730000, China
Abstract:
The R&D process of anti-weathering plastic woven sacks requires accelerated weathering test. Weathering tests can increase time and production cost. Gray model GM(1,1) was applied to predict the final test results using five and nine data separately. The relative error of the two perditions was calculate and compared. The results showed that the prediction error which calculates from nine data is within an acceptable range, so the model can be used for prediction. As a result, in the process of product development, the weathering test time can be shortened to 96 hours to reduce costs and development time.
Key words:  plastic woven sack  artificial accelerated weathering  grey theory

关于我们 | 联系我们 | 投诉建议 | 隐私保护

您是第24463706位访问者    渝ICP备15012534号-2

版权所有:《包装工程》编辑部 2014 All Rights Reserved

邮编:400039 电话:023—68792836传真:023—68792396 Email: designartj@126.com

    

  
 

渝公网安备 50010702501717号